Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I import tabular data from excel to ANSYS related to the geometry of a mesh?

Status
Not open for further replies.
SteFan89

SteFan89

Bioengineer
Joined
Mar 16, 2019
Messages
8
Location
GB
The excel data is the X,Y of a material deformed. In ANSYS the same material should be created in its original shape and dimensions. How do I apply the deformation to the original shape in ANSYS, when this deformation info should come from excel data?
 
Status
Not open for further replies.

Similar threads

N
  • Locked
  • Question Question
How to bond or increase adhesion of a extruded silicone hose(braided hose, heater hose etc)?
Replies
0
Views
692
nikhilmathew
N
H
  • Locked
  • Question Question
Polyamide to EPDM rubber bonding
Replies
4
Views
6K
Henry Chiansky
H
edison vontex
  • Locked
  • Question Question
Is there currently a method to completely solve the blooming problem in rubber products or at least
Replies
0
Views
731
edison vontex
edison vontex
IFSG
  • Locked
  • Question Question
Rubber to Steel Bonding Issues
Replies
3
Views
894
TugboatEng
TugboatEng
R
  • Question Question
Reduce compression set of chloroprene/neoprene
Replies
5
Views
6K
WKTaylor
WKTaylor

Part and Inventory Search

Sponsor

Back
Top