Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I get out of a hydro. No water access.

Status
Not open for further replies.
Joined
Sep 29, 2012
Messages
12
Location
HK
Hi Everyone,

I live in South Australia and due to recent drought water is an extremely rare and far to valuable a resource to waste on a hydro test if not 100% necessary. I plan to jack a tank and replace annular plates. If say I use qualified welders, a good welding inspector, perform 100% mag particle NDT and vacumme box all welds would I not have enough information to determine that the repairs are sound?

1) What test could I do to 100% prove the repairs are good other than a hydro
2) What would I need to do to satisfy API 653
3) Has anyone heard of such exceptions in the past.

Thanks.
 
Clause 12.3.2 of API 653 may provide the answer that you seek. You will need to confirm all appropriate requirements have been met.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top