Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How create constrains with limits?

Status
Not open for further replies.
ErnestoM

ErnestoM

Mechanical
Joined
Oct 3, 2012
Messages
5
Location
US
I use NX 7.5 and I don't know to use the constrains with limits, for example "limit distance" from solidworks, I work with mobiles parts and I need change the position to any part, for example one pneumatic piston, I want change the stroke lenght in assemblies
Thanks!
 
Status
Not open for further replies.

Similar threads

Jashe
  • Question Question
How to create Radial Section Cut on NX Drawing
Replies
5
Views
11K
SDETERS
SDETERS
CAD2015
  • Locked
  • Question Question
Show/Hide constrains in NX 2212....................
Replies
2
Views
1K
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Create Sheet and Drawing templates........................
Replies
7
Views
4K
CAD2015
CAD2015
Carbonated
  • Question Question
Distance constraint incompatible with cylindrical
Replies
2
Views
5K
Carbonated
Carbonated
Befuddled
  • Locked
  • Question Question
Create a lots of ITEMS in TC in bulk
Replies
3
Views
2K
Befuddled
Befuddled

Part and Inventory Search

Sponsor

Back
Top