Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How could I go about calculating the geometry of this shape?

Status
Not open for further replies.
tugni925

tugni925

Mechanical
Joined
Sep 14, 2020
Messages
107
Location
NO
The geometry looks like this, complicated but fortunately its symmetric about all the axes:

1_ku0mqd.png


The geometric parameters used in the model, everything is defined by the first three variables a,b,t:

parameters_cyvp53.png


Not even sure how to start on finding the volume which would be given by the parameters a, b and t.

2_pdajzc.png

3_zinpfi.png
4_wbcksn.png
 
Sort by date Sort by votes
In Comsol you can use Measure tool or Integration operator to calculate the volume of the model.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

F
  • Locked
  • Question Question
How to Integrating the shear stress of the cross sectional area to find the moment M?
Replies
9
Views
6K
ThomasH
ThomasH
F
  • Question Question
How to determine G12 if I have E1, E2 and v12?
Replies
3
Views
2K
SWComposites
SWComposites
A
  • Question Question
Problem fusing cone with curved geometry in Salomé-Méca (GEOM module)
Replies
0
Views
6K
Aliénor
A
imti7
  • Locked
  • Question Question
How to find the Max capacity of the foot bracket using FEA?
Replies
9
Views
980
geesaman.d
geesaman.d
Joel_Lapointe
  • Locked
  • Question Question
Get fatigue the notch factor for non standard geometry?
Replies
2
Views
464
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top