Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

How can I view the loads in these beams/nodes?

Status
Not open for further replies.
markborges

markborges

Mechanical
Joined
Nov 26, 2003
Messages
56
Location
US
Hi All,

I am new to ANSYS Classic FEA and have a simple question.

If I have "scripted" in a few beams w/ beam releases etc, how can I view the loads in these beams/nodes?

They are BEAM44 elements and I have keyopt (6) set to 1; ie., Printout member forces and moments in the element coordinate system.

I have found the PRRSOL,FX command; however, the output is truncatd and I do not know the node number. Because I scripted it, I know the node name; but....


Thanks
Mark
 
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
struclearner
  • Locked
  • Question Question
Beams Modeling Bolts “Behavior” Options
Replies
2
Views
2K
struclearner
struclearner
md_salem
  • Locked
  • Question Question
how to do share topology in the design modeler in Ansys Workbench
Replies
1
Views
938
Stick.
Stick.
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki

Part and Inventory Search

Sponsor

Back
Top