adrianviorel
Mechanical
On a pressure vessel under ASME code, material A516 gr 60, hot spots for correcting some local deformation are allowed?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
hot spots 1
- Thread starter adrianviorel
- Start date
- Status
-
1
- #2
You mean using controlled heating to move material into shape to reduce distortion. Yes, it is allowed provided you have some type of procedure to control this process and you have some type of surface NDT performed to ensure no defects from this operation. I would also make sure you have portable hardness testing performed as part of your QC.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question