I have a crane travelling along a two span continuous beam with two moving wheel loads. The wheel loads are primarily vertical, but in some cases there is also a lateral load associated with each wheel (perpendicular to beam). Is it possible to model horizontal moving loads? If so, what is the text to use in the input file?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Horizontal moving loads 1
- Thread starter MotorCity
- Start date
