Honeycomb Sandwich Panel Shell Modeling

[VN1981]

Folks,
This methodology comes from a NASA reference. They have provided instructions for shell modeling using Nastran. I tried to replicate the same in Abaqus but in vain. Was wondering if someone could help me out?

General Honeycomb Panel Calculations:

https://femci.gsfc.nasa.gov/hcplate/index.html

Implementation in Nastran:

https://femci.gsfc.nasa.gov/hcplate/honeycomb_pshell.html

 

[Mustaine3]

What exactly is your question? Where are you struggling with Abaqus?