Hitachi Seiki HT20SII CNC Lathe

[mroy0404]

Hi Guys

I bought this CNC lathe that has a PC not ready alarm on a Seicos LB Mark II control. Has anyone seen this problem before and repaired it.What are the possible causes for this alarm.
I know I should have looked into this before buying, but it seemed like a good deal.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280097549196&sspagename=ADME:B:AAQ:US:1

Thanks for your help

 

[TINkKEr]

Hi
this sounds like a question for cnczone.com. They have groups for most controls there.

john