Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Historic I-Beam Information

Status
Not open for further replies.

Toby43

Structural
Mar 9, 2017
114
Hi all,
Anyone have any data on historic I-beam shapes use in Australia (specifically WA). I am assessing an existing building which has a 360 deep I-beam with a flange width of 140mm which doesn't match todays profiles. Building is circa 1950-60. I'm specifically chasing the steel properties (yield etc...).

Thanks in advance
Toby
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor