Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Historic Hollowcore Nomenclature

Status
Not open for further replies.
Lazzaroni

Lazzaroni

Structural
Joined
Feb 2, 2006
Messages
16
Location
US
I am trying to determine the capacity of existing 6" hollowcore with 2" topping. The existing drawings call it out as '6HS 105AT'. Some are called out with '065AT' or '085AT'. Is the '###AT' a catalog designation? If so, any resources I can reference?
 
Status
Not open for further replies.

Similar threads

Baffled Engineer
  • Question Question
Hollowcore Anchor Capacity
Replies
7
Views
3K
Baffled Engineer
Baffled Engineer
EngDM
  • Locked
  • Solved
Unknown nomenclature on existing
Replies
14
Views
2K
EngDM
EngDM
Engineer CFL
  • Question Question
Strand Pattern in Historic Double Tee
Replies
3
Views
2K
LittleWheels
LittleWheels
Simba13
  • Locked
  • Question Question
Historic Brick Proof Loads
Replies
4
Views
4K
XR250
XR250
byrneoin
  • Locked
  • Question Question
Continuous reinforcement in HollowCore keyways
Replies
7
Views
2K
lexpatrie
lexpatrie

Part and Inventory Search

Sponsor

Back
Top