Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Highest yield strength for 1/16" diameter wire.
- Thread starter jj83002
- Start date
Take a look at Mount Joy Rocket Wire. This is about the best you can do off the shelf.
EdStainless
Materials
Rocket wire is the ticket.
Just be careful with it, limited ductility.
If you pull a tensile test make sure that you have shielding. Not all of the sample will be there after fracture.
= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
Just be careful with it, limited ductility.
If you pull a tensile test make sure that you have shielding. Not all of the sample will be there after fracture.
= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
- Status
Similar threads
- Locked
- Question