Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High temperature heat shrink

Status
Not open for further replies.
bellm

bellm

Mechanical
Joined
Jan 14, 2002
Messages
4
Location
US
I have a requirement for heat shrink tubing that can withstand continuous operating temperatures of around 300°C.
The best I have found so far is a Teflon based product rated at 250°C.
Alternative methods of electrical insulation to withstand this temperature would be considered, but must be self fixing/locating.
 
Status
Not open for further replies.

Similar threads

dannyman1982
  • Locked
  • Question Question
High temp water proof Cyanoacrylate or better option
Replies
1
Views
282
Compositepro
Compositepro
kheaps
  • Locked
  • Question Question
Temperature Effects on Sound Velocity
Replies
0
Views
270
kheaps
kheaps
sunseeka
  • Locked
  • Question Question
Advice on plastic to withstand cryogenic temperatures
Replies
2
Views
318
Compositepro
Compositepro
Bozo_Sam
  • Locked
  • Question Question
Difference between Moulding shrinkage and thermal expansion
Replies
6
Views
1K
Harry.
Harry.
subsearobot
  • Locked
  • Question Question
seeking strain relaxation vs temperature curve for Ultem 1000 or 1010 or 4001
Replies
4
Views
574
mighoser
mighoser

Part and Inventory Search

Sponsor

Back
Top