tigertommy
Industrial
I´m looking for a 3 way diverter, 1/4" Max pressure 10 Bar,
Temperature: 500 Degree Celcius?
Temperature: 500 Degree Celcius?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
High Temperature Ball Valve
- Thread starter tigertommy
- Start date
- Status
I think that this may be a bit hopeful - have you considered using 2 off on/off units piggy-backed so that they are operated by the one operator - one opening whilst the other closes?
Assuming that you are looking at a ball valve, such units tend not to operate on the same principal as their soft seated cousins.
Assuming that you are looking at a ball valve, such units tend not to operate on the same principal as their soft seated cousins.
You might want to try these people. If you don't see it give them a call. This is the Haskel bunch.
Go to Look at thier multi port valves.
- Status
Similar threads
- Locked
- Question
