High speed, temp.,and press. fluid dynamics

[Dutcher]

I am working on an extreme efficiency engine design. It is near 38% conversion of fuel to work. The design uses an area of fluid dynamics that I am unfamiliar with and I could sure use some help.

I am looking for the SRAM/ RAM dynamics and flame propagation rates, effective compression rates tec.

 

[netlogician]

Try this for flame propagation:

http://cpl.usc.edu/liquid_flames/

http://www.keelynet.com/energy/oxyhyd2.htm

http://www.chevron.com/prodserv/fuels/bulletin/aviationfuel/6_at_engines.shtm

Hope it helps a little.