Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

High Pressure motorized shutoff valve (NO and NC)

Status
Not open for further replies.
PSIFarmer

PSIFarmer

Aerospace
Joined
Oct 19, 2005
Messages
2
Location
US
I am looking for motorized shutoff valves (oxygen and nitrogen gas application) operating in the 4000-6000PSI range. Any help would be appreciated.
 
Sort by date Sort by votes
What is the maximum flow rate from the valve?
 
Upvote 0 Downvote
Thank you for the response...I need two possible sizes: 25lb/hr and 60lb/hr.
 
Upvote 0 Downvote
The H27 from Habonim.com
And a Motor form Valpes.com
Or maybe HOKE.com

Best regards, tntb
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Locked
  • Question Question
Selection of solenoid valve for high pressure and high temperature spray experiment
Replies
0
Views
1K
ethan-111
E
EngTal
  • Question Question
Gland becomes brittle and porous in High Pressure NH3 service
Replies
1
Views
6K
Danlap
Danlap
neroverdi41
  • Locked
  • Question Question
Pressure Control Valve vs Flow Control Valve
Replies
11
Views
6K
Taicho567
Taicho567
Ram55
  • Locked
  • Question Question
Pressure reducing valve testing
Replies
2
Views
3K
Ram55
Ram55
Cyrus444
  • Locked
  • Question Question
Valve working pressure and tempreture
Replies
3
Views
731
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top