Peregrino7
Mechanical
I have a Shell & Tube Heat Exchanger in Wet-H2S service (both sides), and it is specified that NACE TM-0284 shall be met.
For this exchanger (all parts and components) it is also required to meet NACE MR-0103, which is ok.
My question is: NACE TM-0284 tests for HIC shall be performed for all components of Heat exchanger (including internals, tubes, baffles, flanges, tubesheets, etc) or only vessel's plates?
NACE TM-0284 is perfomed for any type of steel or only for plates under pressure? Does it apply to baffles ??
Thanks for your answer...!
GH
For this exchanger (all parts and components) it is also required to meet NACE MR-0103, which is ok.
My question is: NACE TM-0284 tests for HIC shall be performed for all components of Heat exchanger (including internals, tubes, baffles, flanges, tubesheets, etc) or only vessel's plates?
NACE TM-0284 is perfomed for any type of steel or only for plates under pressure? Does it apply to baffles ??
Thanks for your answer...!
GH
