Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi, I'm looking for the Standard Op

  • Thread starter Thread starter -
  • Start date Start date
Status
Not open for further replies.

Guest
Hi, I'm looking for the Standard Operation of Arc, Spot, TIG and MIG welding process and its' Standard Time. Anybody could help. Thanks!
 
Sort by date Sort by votes
Actualy I need the Standard Operation Procedure (SOP) to be established in my co.'s shop floor and then conduct the "Work Measruement" to obtain the STD Time. Since the Arc, TIG, MIG, and Spot welding are widely used, could anyone recommend some useful website or advice...How could I get the STD time for these welding works without conducting the "wrok Measurement". This could be the "Synthetic Time"...please advise...Thanks
 
Upvote 0 Downvote
I recommend than you to consult the Welding Handbook volumen 2 (welding processes of AWS ).I think you can found some answers for this question.

Regards

Jorge
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Wasula K
  • Locked
  • Question Question
Hi I'm a Mechanical Engineer I w
Replies
7
Views
554
LittleInch
LittleInch
EmpiricalEngineer
  • Locked
  • Question Question
Looking for some help
Replies
1
Views
384
MintJulep
M
kingnero
  • Locked
  • Question Question
Looking for European 500A welding generator
Replies
0
Views
294
kingnero
kingnero
metboss
  • Question Question
Welding Procedure Specification (WPS) for the base metal AISI 8630(weld overlay cladding
Replies
2
Views
538
gtaw
gtaw
mrmalcolm
  • Locked
  • Question Question
Does the welder for Welding Process Qualification testing Be Qualified?
Replies
6
Views
3K
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top