Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

HI GUYS I HAD TO UPDATE SOME FE

Status
Not open for further replies.

Bharath47

Mechanical
Joined
Feb 2, 2022
Messages
4
Location
IE
HI GUYS

I HAD TO UPDATE SOME FEATURES OF A MODEL AND UPLOAD IT IN OUR PLM SOFTWARE, BUT I REALISED THE MODELS CAME TO ME WITH A BROKEN LINK OR EXTENDED FEATURE, I AM TRYING TO REPAIR BUT NOT WORKING. CAN ANYONE PLEASE HELP ME WITH THIS REGARD, PLEASE REF THE PICTURE BELOW?

THANKS IN ADVANCE...

Screenshot_2022-07-18_170654_sv0eyk.png
 
What happens when you make the very last feature in the model tree the "current feature" ?

Jerry J.
UGV5-NX1899
 
HI jerry1423 ITS NOT WORKING WHEN I MAKE THE LAST FEATURE AS "CURRENT FEATURE", I TRIED REPLACING THE LINKED BODY ASWELL, NO PROGRESS WITH IT. KIND OF STUCK HERE WITH THIS
 
It looks like if "feature (3) extracted body" is re-associated the rest of the model with update properly.
Edit feature (3) and select the body that is associated to feature (2)
If the body is highlighted before selecting it then deselect it and then re-select it, and press ok.

Capture_ltvkqp.jpg


Jerry J.
UGV5-NX1899
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top