Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi every one, I am modelling bea

Status
Not open for further replies.
NeSsAi

NeSsAi

Civil/Environmental
Joined
Jan 31, 2014
Messages
4
Location
GB
Hi every one,

I am modelling beam to column bolted connection under impact load. Could you suggest the best normal contact type can I use between the bolt head to end plate and between nut to column. Also, just to let you know that I did not model the washers keeping direct contact between bolt head to plate and nut to column.

Regards,
Ali
 
Status
Not open for further replies.

Similar threads

A
  • Question Question
Hinge Interconnection Not Working – Only One Shell Part Moves
Replies
6
Views
12K
FEA way
FEA way
spyros_ar
  • Locked
  • Question Question
Modelling a sandwitch structure in Abaqus
Replies
6
Views
3K
FEA way
FEA way
S
  • Locked
Error in Abaqus Am Modeler Event Series
Replies
3
Views
3K
FEA way
FEA way
G
  • Locked
  • Question Question
How to create this feature in abaqus part modelling?
Replies
3
Views
1K
FEA way
FEA way
W
  • Locked
Abaqus AM Plugin error
Replies
6
Views
2K
Waceem
W

Part and Inventory Search

Sponsor

Back
Top