Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi all I have doubt regarding Hex

Status
Not open for further replies.
NaWin55

NaWin55

Mechanical
Joined
Mar 21, 2020
Messages
98
Location
IN
Hi all
I have doubt regarding Hex Bolts length
how to calculate the total length from underneath head to the bolt tip that is L show in the image below
hex-cap-screw-dimension-chart_psokfm.jpg

How to determine the value of L from the chart
 
Sort by date Sort by votes
I believe L is out of chart (specification) because you can easily have two screws with same dimensions except for total length.
 
Upvote 0 Downvote
You cannot determine L from this chart. You specify the L value you want and that the bolt will be compliant with this specification. Typically makers of bolts have standard lengths to choose from.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
Does BOM have links to which drawings are using the parts in it?
Replies
0
Views
6K
aerostudent2618
A
Alexmob
  • Locked
  • Question Question
Catia Electrical Part Design doubt I had for 20 years now
Replies
1
Views
403
NP_1612
NP_1612
Sidtha
  • Locked
  • Question Question
How to get all items linked to a leader?
Replies
2
Views
2K
Sidtha
Sidtha
Alan Lowbands
  • Locked
  • Question Question
Hi All, i'm after a little macro
Replies
3
Views
349
Alan Lowbands
Alan Lowbands
Sidramayya
  • Locked
  • Question Question
Hi Need to create associated "[u]
Replies
0
Views
233
Sidramayya
Sidramayya

Part and Inventory Search

Sponsor

Back
Top