Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help
- Thread starter rk78
- Start date
i have a macro that will do just this but how do we attach it here?
email me lorys@alphalink.com.au
it works perfectly in V7 but in V8 you have to disable text editor wordprocessor mode..
before running set you text placement to above element.
set you text size colour weight level etc
then run the macro
Then select the element to lable length and it places the text at cursor above element at the same angle element is
then just data point to confirm.
Close text editor , reset to exit.
email me lorys@alphalink.com.au
it works perfectly in V7 but in V8 you have to disable text editor wordprocessor mode..
before running set you text placement to above element.
set you text size colour weight level etc
then run the macro
Then select the element to lable length and it places the text at cursor above element at the same angle element is
then just data point to confirm.
Close text editor , reset to exit.
- Status