HELP?!

[schick]

Ok Solidworks gurus...


I've been running Pro/E for the last few years, and now I've taken a new job running solidworks.


What's the best tools to make the transition? Any recommended books, sites, etc,?


Half scared and thankful!


Schick

 

[SSLaser]

Start with the online tutorials. They will take you a long way. If you havea few years of Pro under your belt, you should have no problem with SWX once you get familiar with it.

 

[Santose]

I was in the same boat as you at one timeI bought the Book Solidworks for dummies it was a big help...

 

[schick]

Thanks guys


Hey Laser-
where are the online tutorials? I went to solidworks.com but it seemed like only the part files, nothing in terms of the "textbook" portion.

 

[SSLaser]

Online Tutorial: They call it "online," but it's really included with the SWX installation.


On the right side of your SWX window, you'll see a series of tabs, the top one should be a house or "home." Click that, and the Resources window will open on the right. Third option down is "Online Tutorials."


Write or PM me if you need more help.

 

[schick]

Thanks Laser.


I was hoping to find something to get a jump on things, but you never do any real work the first day anyway. When I get in front of a station I'll take a run at it.


Thanks again!!


Schick

 

[ttraser]

Here's a few sites:


[url]http://www.solidworks.com/pages/products/SolidWorks_2007/Sol idWorksOfficePremium2007.html[/url]


<?:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" />http://www.eng-tips.com/threadminder.cfm?pid=559


also, go to www.youtube.com type in solidworks in the search. alot of tutorials and information.


hope it helps.

 

[lcyvincent]

hi everyone


may i get the material about ProE and Solidworks tutorial ,because i need it urgently due to my project requrement,i want to learn it very fast ...help me pls


thanks much

 

[design-engine]

you could take a two day or a five day class with an expert at both proe and solidworks. I found that when I learned solidworks I got to expert status much faster with an expert sitting next to me.