Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

help with Solid Edge v11 Step translator

Status
Not open for further replies.
SoCalSwami

SoCalSwami

Mechanical
Joined
Nov 18, 2002
Messages
4
Location
US
I am developing a STEP translator and could use some help.
I need a sample STEP file from Solid Edge v11.

If anyone can help I would appreciate it.
I need a 10 mm cube exported in both AP 203 and AP 214.

Thanks to anyone who can help,
SoCalSwami
cadcam@hallack.com
 
Status
Not open for further replies.

Similar threads

jcpalekar
  • Locked
  • Question Question
How to handle occurrence properties of solid edge through excel sheet?
Replies
0
Views
1K
jcpalekar
jcpalekar
Abhishek H M
  • Locked
  • Question Question
Solid Edge
Replies
3
Views
1K
kjoiner
kjoiner
Mattias_I
  • Locked
  • Question Question
Solid Edge properties shown in Windows Explorer
Replies
0
Views
867
Mattias_I
Mattias_I
Kenny_G
  • Locked
  • Question Question
Solid Edge 2021 Virtual Launch Event July 15th
Replies
1
Views
465
Kenny_G
Kenny_G
Vikas4auto2019
  • Locked
  • Question Question
SOLIDEDGE API
Replies
0
Views
957
Vikas4auto2019
Vikas4auto2019

Part and Inventory Search

Sponsor

Back
Top