Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with furnaces

Status
Not open for further replies.
dpugliesi

dpugliesi

Chemical
Joined
Feb 12, 2013
Messages
20
Location
DE
Do you know about frequent failures in an industrial furnace, in particular those located at Z-neck and SQE?
Also, could you suggest a detailed book regarding furnaces operations and maintenance?
 
Sort by date Sort by votes
Your chances of getting good replies is going to be helped if you provide more information about the type of furance and the specifics of that furnance.
 
Upvote 0 Downvote
Millisecond furnace with induced-draft fan, operating at around 800-870 ℃ and -0.5 mbar.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

sasa000
  • Locked
  • Question Question
Confusion with Woods cost estimation methodology
Replies
4
Views
874
sasa000
sasa000
SF6-146
  • Locked
  • Question Question
Requesting Feedback on P&ID Design for a Cold Water Supply System with Duplicated Pumps
Replies
6
Views
2K
pierreick
pierreick
Rospen
  • Locked
  • Question Question
Horizontal Knockout Drums with very high Liquid Flowrate
Replies
13
Views
1K
Rospen
Rospen
Suchbirthday9919
  • Locked
  • Question Question
Help with pump design
Replies
5
Views
389
LittleInch
LittleInch
BrittleSteel
  • Locked
  • Question Question
Vessels with brittle steel
Replies
6
Views
397
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top