Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with cut out

  • Thread starter Thread starter sledhockeyjock
  • Start date Start date
S

sledhockeyjock

Guest
Hey guy! So I'm new here and I was hoping you could help! I've at this for while, and I can't seem to do it. I'm trying to cut out this image (dragon 1-1) out of the solid (blade type 2). I've tired everything and every program and I can't do it, mostly because it always crashes...Can someone help? I cut need the black parts cut out all the way through the design.
 

Attachments

You must log in or register to reply here.

Similar threads

MarkCA
  • Locked
  • Question Question
Modifying a Part Description without Up-Revving
Replies
1
Views
858
dgeesaman
dgeesaman
P
Cut a part with an another which is moving...
Replies
1
Views
7K
PeterMacGonagan
P
T
Placing part in Assembly but it is out of date?
Replies
0
Views
8K
The One
T
I
Will inventor work with athlon 3000g cpu 16gb ram 500gb ssd no gpu only cpu integrated praphics?
Replies
0
Views
5K
Isauro1616
I
E
Help with adding dimensions
Replies
0
Views
6K
eagle2020
E

Part and Inventory Search

Sponsor

Back
Top