Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

help with an old material designation - HC-218 acrylic

Status
Not open for further replies.
rmetzger

rmetzger

Mechanical
Joined
Dec 2, 2004
Messages
200
Location
US
I posted this question in another forum without any response:

We have an old spec for a part using a cast acrylic base material. The Acrylic grade listed is HC-218 but I cannot find any useful information in regards to the composition nor properties of this grade. Any help is welcomed!!!

Is there a modern version of this spec?

thanks
 
Status
Not open for further replies.

Similar threads

jetpackjbd
  • Question Question
Help finding a heat resistant, non-conductive, and pressure tolerant material
Replies
16
Views
7K
HTURKAK
HTURKAK
K
  • Question Question
Strenght material problem
Replies
3
Views
1K
HTURKAK
HTURKAK
ritsa p
  • Locked
  • Question Question
MATERIAL IDENTIFICATION
Replies
2
Views
1K
Dhurjati Sen
Dhurjati Sen
aldumoul
  • Locked
  • Question Question
Dampening material
Replies
3
Views
3K
dik
dik
R
  • Locked
  • Question Question
Wet clutch plate material
Replies
0
Views
688
RickyW
R

Part and Inventory Search

Sponsor

Back
Top