Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with 4.16 kV switchgears

Status
Not open for further replies.
Coca1995

Coca1995

Electrical
Joined
May 16, 2023
Messages
11
Location
CA
Hey there,

Do you guys know if any vendors that build or distribute Medium voltage 4.16 kV double bus bar system. I looked in Schneider but they have double bus bar system for 13kV+
 
Status
Not open for further replies.

Similar threads

J
  • Question Question
Directly from 30 kV to 0.4 kV? Or step down the voltage in stages, typically from 30 kV to 6 kV, then from 6 kV to 0.4 kV.
Replies
12
Views
18K
electricuwe
electricuwe
O
  • Question Question
25.3 kV Nominal Rating GCB Applied to 26 kV Nominal Validation
Replies
2
Views
659
Kiribanda
Kiribanda
T
  • Question Question
Install Difference Voltage Rating 24 kV to 13,8 kV
Replies
2
Views
2K
thepo
T
NickParker
  • Locked
  • Question Question
Thermographic Inspection window on MV switchgears
Replies
5
Views
3K
jraef
jraef
NickParker
  • Locked
  • Question Question
Bus Bar Sleeves in Switchgears
Replies
7
Views
851
che12345
che12345

Part and Inventory Search

Sponsor

Back
Top