Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help needed for matching the ouptuts for Shell and Solid material type

Status
Not open for further replies.
xplanck

xplanck

Aerospace
Joined
Aug 3, 2011
Messages
3
Location
DE
Hi,
I am relatively new to Ansys APDL.
My question is: I have designed a Solid185 plate with one Piezoelectric patch (it is Solid5) on it. Now, as Solids consists of more nodes (8) I have to switch over to Shell181. Now my problem is, when I find transient response from Solid and from Shell, I want to have same response output from both of them.
Can any one please explain, if any validations I have to do, any specific detail which might help me solving this problem...
Thanks a lot... :)
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
614
vsw
V
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld
andradesilva
  • Locked
  • Question Question
thin-walled 3D solid to a shell
Replies
1
Views
486
Stick.
Stick.
Ahmed_abdelgawad
  • Question Question
CDB and ‘prnsol,s’
Replies
0
Views
6K
Ahmed_abdelgawad
Ahmed_abdelgawad

Part and Inventory Search

Sponsor

Back
Top