Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help! Max1452 get sleep even on working, how hold awake

Status
Not open for further replies.
blueshirt

blueshirt

Industrial
Joined
Feb 2, 2003
Messages
1
Location
DE
The OP-Amp Maxim 1452 begins to sleep not even by powerbreak
also in action powersupplyed. What must we do to hold working? It is used for a thread-tension Sensor with power-
measurement-thickfilmbridge.Must we connect a further part?
The unlock-pin is correct connected with 4.7kohm to ground.
Thank you for urgend help blueshirt
 
Status
Not open for further replies.

Similar threads

KGisME
  • Locked
  • Question Question
Help a non-controls guy with this control application
Replies
2
Views
2K
LittleInch
LittleInch
O
  • Question Question
Recommended Installation Location for "Pressure High" Interlock Instrument on Distillation Column
Replies
1
Views
8K
hacksaw
hacksaw
Ciaci
  • Locked
  • Question Question
Request for Advice on Choosing the Appropriate PT100 Sensor
Replies
9
Views
10K
Ciaci
Ciaci
Justice100
  • Locked
  • Question Question
Big Valve Small valve - how to size the small valve
Replies
6
Views
1K
georgeverghese
georgeverghese
tom33eng
  • Locked
  • Question Question
Guided Wave Radar (GWR) Working Principle
Replies
2
Views
391
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top