Can any one provide help with these warnings:
-WHERE TO FIND THE *NORMAL OPTION
EVENTHOUGH, I REFINED THE MESH BUT THE WARNING STILL EXISTS?!!!!
***WARNING: Abaqus WILL NOT ADJUST THE SURFACE NORMAL FOR THE SYMMETRY PLANE
AT NODE 54 INSTANCE CON OF SURFACE ASSEMBLY_ALLCONSURF. THE
MESH MAY BE VERY COARSE OR THE SURFACE MAY BE UNTRIMMED AT THE
SYMMETRY PLANE. PLEASE USE THE *NORMAL OPTION TO SPECIFY THE
PROPER SURFACE NORMAL.
***WARNING: 2 nodes may have incorrect normal definitions. The nodes have been
identified in node set WarnNodeIncorrectNormal.
-WHERE TO FIND THE *NORMAL OPTION
EVENTHOUGH, I REFINED THE MESH BUT THE WARNING STILL EXISTS?!!!!
***WARNING: Abaqus WILL NOT ADJUST THE SURFACE NORMAL FOR THE SYMMETRY PLANE
AT NODE 54 INSTANCE CON OF SURFACE ASSEMBLY_ALLCONSURF. THE
MESH MAY BE VERY COARSE OR THE SURFACE MAY BE UNTRIMMED AT THE
SYMMETRY PLANE. PLEASE USE THE *NORMAL OPTION TO SPECIFY THE
PROPER SURFACE NORMAL.
***WARNING: 2 nodes may have incorrect normal definitions. The nodes have been
identified in node set WarnNodeIncorrectNormal.
