Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help how to calculate response spectrum (Ss and S1 ) from PGA

Status
Not open for further replies.

shaheebm

Petroleum
Feb 2, 2002
1
Help how to calculate response spectrum (Ss and S1 ) from PGA (2%PE 20Gal and 10% PE 10 Gal) Country is Kuwait (out side the US, can't use USGS software out the limits)

shaheeb
 
Replies continue below

Recommended for you

Ss & S1 are based upon the PGA for a 2% in 50 year (2475 year return) event and 5% damping. Check this document "UFC 3-310-01 Structural loads.pdf" for a published Ss and S1, it has many cities where US bases are throughout the world.


 
ASCE 7-05 chapter 11 gives a detailed procedure for developing design spectrum from Ss and S1.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor