Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help - cannot copy basin file and got warning below. Any ideal to resolve it?

Status
Not open for further replies.
wtyang

wtyang

Civil/Environmental
Joined
Aug 15, 2012
Messages
5
Location
US
WARNING 10215: Could not do requested action because the project is set to read-only.
 
Sort by date Sort by votes
Sorry this is HEC-HMS v 3.5
 
Upvote 0 Downvote
It sounds like the folder that your basin file is located in may be write-protected. If that's the case, you can probably go into the the folder's properties (through windows explorer) and uncheck the read-only option.
 
Upvote 0 Downvote
It determined the project was corropted.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

wesman07
  • Question Question
Help understanding a theory
Replies
6
Views
14K
zelgar
zelgar
PAB - 1
  • Locked
  • Question Question
Catch basin under surcharge condition
Replies
4
Views
6K
TheEnginerd
TheEnginerd
JEawb
  • Question Question
Oscillations and Equalizing in Hydrocad
Replies
2
Views
5K
zelgar
zelgar
D
  • Locked
  • Question Question
Stormwater remediation and erosion control recommendations
Replies
5
Views
6K
Deenie
D
Dersnerman
  • Locked
  • Question Question
Help with Design Resources for Small Overflow Weir Design - Hydropower & Microhydropower
Replies
3
Views
10K
gbam
gbam

Part and Inventory Search

Sponsor

Back
Top