Hello! I am new on ansys.. I have designed my model but I need Guidance for Meshing... I'm familiar with edge sizing and sweeping but I dont know what I want kind of mesh is a good mesh? I have attached What ever I have done uptill now.. please comment is it a good mesh or bad one?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Hello! I am new on ansys.. I have d
- Thread starter khanz_kk
- Start date
[URL unfurl="true"]http://simulatemore.mscsoftware.com/the-best-fea-mesh-density-for-accuracy-and-speed-msc-nastran/[/url]
[URL unfurl="true"]https://caeai.com/blog/how-do-i-know-if-my-mesh-good-enough[/url]
From this distance, I can't tell if the nodes are shared between bodies by having the bodies residing in the same 'part'. If so, you may avoid using contacts.
Best regards,
Sze Kwan (Jason) Cheah
---------------------------------------------------
[URL unfurl="true"]http://www.catb.org/~esr/faqs/smart-questions.html#answers[/url]
[URL unfurl="true"]https://caeai.com/blog/how-do-i-know-if-my-mesh-good-enough[/url]
From this distance, I can't tell if the nodes are shared between bodies by having the bodies residing in the same 'part'. If so, you may avoid using contacts.
Best regards,
Sze Kwan (Jason) Cheah
---------------------------------------------------
[URL unfurl="true"]http://www.catb.org/~esr/faqs/smart-questions.html#answers[/url]
- Status
Similar threads
- Question
- Locked
- Locked
- Question