Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Helical spring

  • Thread starter Thread starter Chang81
  • Start date Start date
C

Chang81

Guest
Design engine thanks so much.

Actually I tried what you mentioned before.But I did'nt join two parts properly.Now I will try to do this one again.There is no suspicious I will have done it.
 
good luck.... post what you have and I can take a look. Don't forget to tell me what version of Pro/E you are using.
 
You must log in or register to reply here.

Similar threads

C
Closed helical spring using helical sweep
Replies
4
Views
5K
annad_m_s
A
Fsadni
  • Locked
  • Question Question
Modelling a spirally corrugated wall on a helical tube
Replies
2
Views
221
Valmic
Valmic
D
Helical sweep direction
Replies
8
Views
5K
srieger
S
nepboi
  • Locked
  • Question Question
ProE Wildfire 5 Spring Mechanism
Replies
0
Views
198
nepboi
nepboi
C
Helical milling
Replies
1
Views
4K
marker4x4
M

Part and Inventory Search

Sponsor

Back
Top