Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Helical rack and pinion

Status
Not open for further replies.
steveren

steveren

Mechanical
Joined
Jan 10, 2005
Messages
5
Location
GB
Can anyone suggest to good text book, with suitable calculations for working out the capacity of a helical rack and pinion for different materials?
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
Involute Rack and Sector Pinion Gear Question
Replies
5
Views
2K
mfgenggear
mfgenggear
SMKRe
  • Locked
  • Question Question
Expansion of pinion and gear tooth in radial direction
Replies
6
Views
1K
3DDave
3DDave
SMKRe
  • Locked
  • Question Question
Helical gear teeth deformation due to high rotational speeds - ANSYS
Replies
11
Views
5K
mfgenggear
mfgenggear
pat123__
  • Locked
  • Question Question
How to determine the power rating of both a pinion and a girth gear set
Replies
4
Views
768
Compositepro
Compositepro
SMKRe
  • Locked
  • Question Question
Helical gear tooth deformation due to centrifugal effect or (rotational velocity)
Replies
1
Views
461
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top