Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Helical Probe Test (HPT)

Status
Not open for further replies.

WHEngineer

Geotechnical
Feb 26, 2003
48
I am searching for information on the HPT test. Some 3rd party engineers in my area of the SE use this test instead of DCP or SPT to determine soil bearing. I am looking for information on validity and experimental/empirical correlations on the equipment and sources.
 
Replies continue below

Recommended for you

The following paper should help you out. I have not read this particular paper, but I just happen to run across it. I hope it helps.

Yokel, F.Y. and Mayne, P.W. (1988) Helical Probe Tests: Initial Test Calibration, ASTM Geotechnical Testing Journal, Vol. 11 (3), 179-186.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor