Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Helical milling

  • Thread starter Thread starter chatmak
  • Start date Start date
C

chatmak

Guest
Hello gentlemen,
some of you know how to create nc sequence volume rough where the incision depth for each slice of each passage to be performed with helical approach?

Best regards
Chatmak
 
Last edited:
Hello gentlemen,
some of you know how to create nc sequence volume rough where the incision depth for each slice of each passage to be performed with helical approach?

Best regards
Chatmak


You need to populate the following parameters:

HELICAL_DIAMETER
ENTRY_ANGLE (usually in increments of 360)
 

Part and Inventory Search

Sponsor

Back
Top