Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
helical gear
- Thread starter cni76
- Start date
hi,
i had dont this for my bachelors thesis. i first made the helical curve using the coordinates i generated from the parameters given- using a c progarm. then i made the surfaces by connecting all of them. it might sound tedious, but thats the only method by which i could arrive at something.
hope this helps u in some way.
suresh
i had dont this for my bachelors thesis. i first made the helical curve using the coordinates i generated from the parameters given- using a c progarm. then i made the surfaces by connecting all of them. it might sound tedious, but thats the only method by which i could arrive at something.
hope this helps u in some way.
suresh
- Status
Similar threads
- Locked
- Question
- Locked
- Question
