Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heavier engine affect rear end?

Status
Not open for further replies.

kander

Mechanical
Joined
Jan 20, 2005
Messages
64
I have resently fitted a larger engine to my 4wd (light weight alloy petrol to large heavy diesel), increasing the front end compression on the coil springs. The car now feels a little 'sloppy' in the rear end and I can only imagine that this is due to the heavier front end. All mechanical components are in good condition and not in question.

Is this the case? I'm liking this to a bull whip, where any cornering energy is concentrated onto the rear end.

Do you think that heavier rated springs on the front will fix this?
 
Heavier spring rate and correct spring length to bring ride height back to OEM spec will fix it.

It has nothing to do with Bull Whipps. It has to do with changes to virtually every aspect of suspension geometry due to change of ride height.

Regards

eng-tips, by professional engineers for professional engineers
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top