Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

heat transfer coefficent for elastomers like HNBR

Status
Not open for further replies.
gumby69

gumby69

Materials
Joined
Aug 6, 2006
Messages
8
Location
GB
Hi Does anyone know the heat transfer for HNBR with a modest amount of carbon black filler.
I assume it is similar to regular NBR also called nitrile rubber.
I believe I read it is a bit higher than natural rubber which I remember being around 0.15 in metric units.
I think NBR was about 0.24 if I recall correctly.
Thanks.
Bill
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
Tank jacket heat transfer coefficients
Replies
3
Views
8K
BobStafford
B
I
  • Locked
  • Question Question
Heat Transfer with the sea
2
Replies
20
Views
10K
Snickster
Snickster
K
  • Locked
  • Question Question
Heat Transfer with Recirculating Chiller Problem
Replies
0
Views
1K
Kishanb_01
K
C_V_C_V
  • Locked
  • Question Question
Controlled Constant Heat Transfer.
Replies
8
Views
832
LittleInch
LittleInch
A
  • Locked
  • Question Question
Analysis Heat and mass transfer incopra book problems in 3 Software Engineering
Replies
0
Views
1K
Ahmadvictor
A

Part and Inventory Search

Sponsor

Back
Top