Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heat of Dilution 1

Status
Not open for further replies.

ssimpson24

Chemical
May 3, 2016
1
I am looking to increase the concentration of 79% w/w sulphuric acid by mixing it with 96% w/w sulphuric acid.

The dilution of 96% to 90% sulphuric acid is exothermic, however am I right in thinking that the increase of concentration of the 79% to 90% sulphuric is endothermic. Will this absorb the heat from the exothermic dilution causing an overall endothermic mixing?

Thanks
 
Replies continue below

Recommended for you

Fig 2-30 in Chapter 2 of Perry Chem Engg Handbook 7th edition shows the enthalpy graph for H2SO4. Using the lever rule, you may figure out what the temp and enthalpy of the mix solution will be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor