Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heat flux extraction in ABAQUS

Status
Not open for further replies.

astraaa

Automotive
Joined
Nov 24, 2010
Messages
2
Location
DE
Hello everybody,
I am new to Abaqus output capabilities. I have simple rectangular block (descritized with DC3D8 continuum elements). All the sides of the block are temperature defined boundaries and the front and back faces are defined with some Heat transfer coefficient. I would like to know the Heat flux value across all the boundaries. (like side_boundary1=xyz W/m2, side_boundary2=..,front_face=..). Is there any way to get the Heat flux values for the defined set/boundary in Abaqus?
Please let me know your opinions on this.
Regards
 
You might want to post this in forum799 as it deals specifically with how to do things in ABAQUS.

Patricia Lougheed

******

Please see FAQ731-376: Eng-Tips.com Forum Policies for tips on how to make the best use of the Eng-Tips Forums.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top