Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Heat Exchanger suggestion for silicone polyester thermoset coatings
- Thread starter datechguy
- Start date
Hello,
Without knowing anything about your process, I would propose a closed vessel with a heating or cooling coil as requirements dictate, and with an agitator to help keep temperature variations of the material you are trying to control within the vessel to a minimum.
Without knowing anything about your process, I would propose a closed vessel with a heating or cooling coil as requirements dictate, and with an agitator to help keep temperature variations of the material you are trying to control within the vessel to a minimum.
- Status
Similar threads
- Locked
- Locked
- Question
- Locked
- Question