Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Heat and pressure derating for evaporator.

Status
Not open for further replies.
JohnBain

JohnBain

Chemical
Joined
Mar 22, 2010
Messages
1
Location
US
I have a Kontro Thin Film onsite that currently uses 150 lb steam (hastalloy c inner wall with carbon steel shell). Customer wants to use hot oil. The tag says 150 psi at 400F. How do I de-rate the pressure of the unit for operation at 700F?
 
Status
Not open for further replies.

Similar threads

P
  • Question Question
Pressure drop
Replies
2
Views
7K
shvet
shvet
adrich91
  • Locked
  • Question Question
Process pressure
Replies
8
Views
6K
pierreick
pierreick
R
  • Locked
  • Question Question
Pressure Built Up Unit (PBU) Adding Pressure to LNG ISO Tank
Replies
6
Views
3K
georgeverghese
georgeverghese
Pavan Kumar
  • Locked
  • Question Question
Steam Mains Pressure Control Valve Sizing
2
Replies
28
Views
10K
pierreick
pierreick
Pavan Kumar
  • Locked
  • Question Question
Tank Fluid Heating with Recirculation and Heat Exchanger.
2
Replies
32
Views
3K
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top