Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Having sample sprinklers tested at a "recognized testing laboratory" (NFPA #25)

Status
Not open for further replies.
SprinklerDesigner2

SprinklerDesigner2

Mechanical
Joined
Nov 30, 2006
Messages
1,281
Location
US
I am sure it doesn't make a difference but Georgia is still using the older NFPA #25. That said

NFPA #25 said:
5.3.1.1* Where required by this section, sample sprinklers shall be submitted to a recognized testing laboratory acceptable to the authority having jurisdiction for field service testing.
Click to expand...

Is there a list of "recognized testing laboratory" somewhere? What do you do to comply?




 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

mjoyner
  • Locked
  • Question Question
Determining NFPA 25 20 yr sprinkler head sample
Replies
1
Views
2K
cdafd
cdafd
SprinklerDesigner2
  • Question Question
NFPA 13R Density required outside the living units in a common area when using listed residential sprinklers.
Replies
4
Views
16K
cdafd
cdafd
SprinklerDesigner2
  • Locked
  • Question Question
Question about whether a system is NFPA 13 or NFPA 13R
Replies
1
Views
3K
TravisMack
TravisMack
E
  • Question Question
When to include exterior dry sidewall sprinklers in calculations with interior sprinklers?
Replies
1
Views
3K
TravisMack
TravisMack
W
  • Question Question
K25 Sprinklers in Warehouse – Effect on Connected Light Hazard Areas?
Replies
5
Views
10K
cdafd
cdafd

Part and Inventory Search

Sponsor

Back
Top