Have a part follow all steps of an already exploded part

[NCSU1980]

Is there a way to have a part that has not been exploded to follow all the steps of an already exploded part? Sometimes I miss a part (like a screw) and need to catch it up with a part or group of parts that were previously exploded. I can go through step by step, but am looking for an easier way.

Steve
SW 2006 sp 5.0

 

[Eltron]

Just double-click on the step in your exploded view and add the part.

Dan

http://www.eltronresearch.com

Dan's Blog

 

[CorBlimeyLimey]

In SW09 you just double-click on (or edit) the explode step and include the missed part in the selected group. I assume SW09 would be similar.