Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

hardware for SW2006?

Status
Not open for further replies.

deardave

Industrial
Aug 18, 2005
7
I'm using SW2006 and need to get a decent system to replace my Dell from 1999 - probably will go to Dell again. I'm not sure what processor I need. Does it have to be dual-core or two processors? Any recommendations? Does it make a difference? Also looking for suggestions for OS, video card, how much RAM. I don't do huge assemblies- maybe 20 parts.I'm looking to spend about $2000.

Thanks.

-DD
 
Replies continue below

Recommended for you

Check out the SW website... hardware of today is overkill, but if you go new you have no choice... just check out the site to make sure you get what SW06 supports along with video card.

Regards,

Scott Baugh, CSWP [pc2]
"If it's not broke, Don't fix it!"
faq731-376
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor