Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardfacing

Status
Not open for further replies.
Valving

Valving

Civil/Environmental
Joined
Feb 23, 2011
Messages
83
Location
TR
Stellite is the most common hardfacing method as far as I see in the industry.
Which other materials are used for hardfacing?
What about nickel overlay? Any comparison for nickel & stellite ?
 
Sort by date Sort by votes
Unfortunelly at this moment I am not with my specifications in hand but there are tungsten carbide, hard chrome. Try the site of Praxair to find anything else.
 
Upvote 0 Downvote
Colmonoy is one surface coating material.
 
Upvote 0 Downvote
There are many Hard facing materials available depend on service application.

Tungsten carbide is the hardest one. Stellite-6 is commonly used HF material
along with SS 316 in valve trims. Also, HF would be used in High Pressure appln only.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Gio Grande
  • Locked
  • Question Question
ENP vs HardFacing for valve seat
Replies
4
Views
930
Danlap
Danlap
Actionman123
  • Locked
  • Question Question
Stellite or Tungsten Carbide hardfacing
Replies
4
Views
1K
Actionman123
Actionman123
osuamp
  • Locked
  • Question Question
Valve seat and disc hardfacing
Replies
8
Views
479
dave2109
dave2109

Part and Inventory Search

Sponsor

Back
Top