Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hammering in condensate flash tank

Status
Not open for further replies.
abutt116

abutt116

Chemical
Joined
Nov 4, 2005
Messages
18
Location
CA
Hi,

We have condensate flash tank at our urea plant. Condensate inlet pressure to the tank is about 75 psi. By flashing we are getting 55 psi steam. Problem we are facing is the hammering in the tank. There is vibration in the tank and the attached piping all the time.
Help in this regard will be appriciated.

Thanks.
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

seagal3232
  • Locked
  • Question Question
What's the best way to dissolve CO2 in water in a continuous process at low pressure?
Replies
11
Views
2K
bimr
bimr
rika kose
  • Locked
  • Question Question
solubility Methyl chloride in methanol
Replies
0
Views
796
rika kose
rika kose
processendbd
  • Locked
  • Question Question
Multiple Property Method In Same Aspen Plus File
Replies
4
Views
1K
processendbd
processendbd
Phani Y
  • Locked
  • Question Question
Toluene Methanol Alkylation simulation in DWSIM
Replies
0
Views
202
Phani Y
Phani Y
DanAnotherChemist
  • Locked
  • Helpful tip Helpful tip
approaching an inventor
Replies
0
Views
715
DanAnotherChemist
DanAnotherChemist

Part and Inventory Search

Sponsor

Back
Top